ELECTROSTATIC CLOUD CHAMBER ECC 700.

ECC 700 is an unique Powder Coating Machine ideal for coating very large volumes of small and medium sized components.

Coating Procedure

The ECC 700 consists of a fully automatic self contained powder coater --at the heart of which is a box with a sliding top lid.

This self contained unit works on a single phase-- 300w power supply. It does not require air-compressor, filter, powder gun, spray booth, powder reclamation system etc.

The objects to be coated are suspended in the powder chamber and after sliding close the lid the unit is switched on for a pre-determined time (3 to 11 seconds)depending on the thickness required (30-300 um.)

Two separately mounted electrodes polarize the powder particles. The powder paint spread previously at the bottom gets vigorously agitated. The dc high voltage simultaneously electro statically charges this vibrating powder. Hence the powder rises to coat the work pieces by pure electrostatic means.

Powder not deposited on the pieces falls back to the bottom and is once again whirled up in the next cycle resulting in near 100% utilization.

100% powder economy is thus guaranteed and expensive cumbersome recovery systems are not necessary.

Colour Change

The ECC 700 represents the high tech future of powder coating for batch production (for many applications conveyorized models are available). ECC 700 is suitable for first time user or professional user. It is perfect as a complete machine by itself or as a supplementary powder coater for special parts.

Advantages

Ideally Suited for many components
Ideally suited for high volume production of 2D (2 dimensional) simple products.

Exemplary Economy
No Powder Spray Guns required. No compressed air required. No expensive powder spray booths required. No expensive powder recovery systems required. Low capital investment. No loss of material. No delay period of cleaning when changing the powder paint.

Low Power consumption
This type of powder coating unit utilizes and consumes a very low amount of power – only 175VA. Operates on simple and standard available single phase supply. No complicated and bulky 3 phase supplies required.

Compact and Flexible Unit
The cloud chamber is a most compact self contained unit and saves space.

Extremely fast colour change
Colour changes are carried out by simply interchanging the inner coating colour chambers. This can be very rapidly achieved.

Pollution free Clean, problem-free technology.
No expense due to pollution control. All emission specifications have been fulfilled from the outset.

Personnel problems are solved
Simplest operation and handling without requiring any training period. Optimum unit efficiency without personnel problems.

TECHNICAL SPECIFICATIONS

Complete Automatic Powder Coating Unit ECC 700 ready to operate and consisting of

a) Integrated Bottom Chamber on castors consisting of the high voltage polarizing circuitry for both powder charging and fluidizing	1 No.
b) Top Outer Chamber with lid	1 No.
c) Original Mitsuba inner Colour box chamber with polarizing electrodes Size of colour box = 21” W x 39” L x 19” H	1 No.
d) Electronic control panel having thickness control timer and electronic controls for the “charging polarization electrodes” and the “fluidization polarization electrode”.	1 No.